Bell System BL106 Manual de usuario descargar pdf (Pagina 16)

CS106/BL106 Combined Door Entry and Coded Access

Programming the C106 Keypad

General

The 10 access codes, lock time etc, are all programmed via the keypad. To

prevent unauthorised use, a security key (1 - 8 digits) must be entered.

The basic principle of programming is as follows:

Each program function is described in detail on the following pages.

Procedure

■ Enter the security key (1 to 8 digit number, default 1212). Check

the red LED flashes continuously.

■ Enter a key sequence on the keypad.

■ Observe both the red and green LEDs flash for one second.

■ When all functions are programmed, exit program mode by

pressing

++++

. The red LED stops

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Sin comentarios

Bell System BL106 Manual de usuario Pagina 16