Bell System bell free Manual de usuario descargar pdf (Pagina 38)

Bellﬁ res

English

Instructions for use and installation instructions

3.5.4 Positioning the ceramic log set, marble pebbles and ceramic stones

The appliance can be supplied with:

• Ceramic log set + embers

• Ceramic stones

• Marble pebbles

Important: • Carefully place the embers, set of logs, the ceramic stones

or the marble pebbles on and around the main burner

according to the directions in this chapter.

• Do not place any embers, logs, marble pebbles or stones

against the pilot light burner. For that reason, the main burner

has a protective pilot-light cowl. Never remove this cowl! Make

sure that the pilot ﬂ ame can burn at all times freely over the

main burner. Only in this way is proper ignition of the main

burner ensured.

Ignoring these directions could lead to a dangerous

situation.

• The burner bed (with embers) and the positioning of the logs,

marble pebbles or stones must not be changed.

• Only use those items supplied! Thesebeen rigorously

checked and the quantities adapted to the appliance.

• Replacement parts, including the ceramic mat are available

from your dealer.

• Fitting may only be carried out by a qualiﬁ ed person.

3.5.4.1 Ceramic log set + embers

NATURAL GAS APPLIANCE:

1 Place the ceramic mat on the burner in such a way that the holes in the mat are in

line with the burner openings.

2 Remove the embers (2x 100 gram) carefully from their packaging and spread them

evenly over the burner mat and the grate around the burner.

Note ! Small embers and their residue should not be scattered on

the burner.

This can cause a blockage on the burner oriﬁ ces.

3 Place the logs on the burner. See ﬁ gure 17.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Sin comentarios

Bell System bell free Manual de usuario Pagina 38